Metrohm tiamo 1.2 Manual - Handbuch (Seite 577)

Commands 551
FLOW
Command for controlling the gas flow of the 774 Oven Sample Processor.
Devices
This command can only be executed with the 774 Oven Sample Processor.
Appearance
The command has the following appearance:
Parameters
The parameters for the command FLOW are configured in the following dialog
window:
• FLOW
FLOW - properties
Command name
25 characters, [ Gas flow # ]
Name of the command.
Device
Device name
Device name, [ not defined ]
Selection of a 774 Oven Sample Processor from the device table. Addition-
ally,
not defined can be selected. In this case, the device name must be as-
signed by the user at the start of the method.
Device type
774 Oven Sample Processor
Display of the device type. If a device is selected under Device name , this
parameter is not editable any more. The device type belonging to the se-
lected device is displayed instead.
If the option
not defined is selected as Device name , all device types being
able to execute the command can be selected independently from the de-
vices in the device table.