Metrohm 799 GPT Titrino - Handbuch (Seite 174)

3.2. Remote control commands
799 GPT Titrino
170
3 Clear (pin 10) 3 EOD (pin 17)
4 Smpl Ready (pin 23) 4 Monitoring, line L4 (pin 3)
5 pin 11 5 Error (pin 16)
6 pin 24 6 Activate, line L6 (pin 1)
7 pin 12 7 Pulse for recorder (pin 2)
8 not used (pin 6)
9 not used (pin 7)
10 Monitoring (pin 8)
11 Monitoring (pin 13)
12 Monitoring (pin 19)
13 Monitoring (pin 20)
3.2.2.141. Info.ActualInfo.Assembly.CyclNo read only
$Q sends the current cycle number of the voltage measurement cycle, e.g.
"127". From the cycle number and the cycle time (see 3.2.2.149), a time
frame can be set up.
The cycle number is set to 0 on switching on the instrument, on every start
and for QuickMeas. It is incremented as long as the instrument remains
switched on.
3.2.2.142. Info.ActualInfo.Assembly.Counter.V read only
Info.ActualInfo.Assembly.Counter.Clear $G
$Q sends the volume. With the function &Info.Assembly.Counter.Clear $G, the
volume counter is set to zero.
3.2.2.143. Info.ActualInfo.Assembly.Meas read only
$Q sends the current measured value from the assembly.
3.2.2.144. Info.ActualInfo.Titrator.CyclNo read only
Info.ActualInfo.Titrator.V read only
Info.ActualInfo.Titrator.Meas read only
Info.ActualInfo.Titrator.dVdt read only
Info.ActualInfo.Titrator.dMeasdt read only
Info.ActualInfo.Titrator.dMeasdV read only
Info.ActualInfo.Titrator.ERC read only
Info.ActualInfo.Titrator.T read only
$Q sends the current values in the following formats:
DET MET SET KFT STAT,
DOC
DOS MEAS CAL
CyclNo 127 127 127 127 127 127 127 127
V(ml) 1.2345 1.2345 1.2345 1.2345 1.2345 1.2345 - -
Meas:
pH
U, Ipol (mV)
Upol (uA)
T (°C)
3.345
-345.6
-12.5
-
3.345
-345.6
-12.5
-
3.6(mV)
-345.6
-12.5
-
-
-345.6
-12.5
-
3.6(mV)
-345.6
-12.5
-
3.6(mV)
-345.6
-12.5
3.345
-345.6
-12.5
25.0
3.345
-
-
-
dVdt (ul/s) - - 2.5142 2.5142 2.5142 - - -
dMeasdt